|
|
|
Home » G-Force Accessories
G-Force Accessories
The ultimate swashplate tool is the SwashPro V2.
The same tool is adjustable from a 450 sized heli up to a 90 sized heli.
Swashtypes with 120, 135 and 140 degree is no problem with this tool. Also includes are shaft blocks that will accept mainshafts with 5mm, 8mm, 10mm and 12mm.
Idea for unusual types of swashplates like Hirobo using 10mm mainshafts while others use 12mm.
Also works on the Kasama helicopter swashplate where the linkage ball is on the outside of the anti-rotation bracket.
|
 |
|
 |
| 5/16 Adapter Shaft for ProStart |
8mm Adapter shaft for ProStart (part# GFA7067) |
| USD$ 8.00 |
 |
|
|
| USD$ 8.00 |
|
|
|
|
5/16 adapter shaft for the G-Force ProStart.
To be used with 5/16 clamping style 6mm hex starter...More |
8mm adapter shaft for the G-Force ProStart.
To be used with 8mm clamping style 6mm hex starter w...More |
| |
 |
|
 |
| Drive Cone for Cordess drill/driver |
Fan Hub Puller for 600N 700N (part# GFA7086) |
| USD$ 19.00 |
|
|
|
| USD$ 18.00 |
|
|
|
|
Drive cone installs directly into a cordless drill/driver to start RC plane engines.
Silcone cone...More |
The G-Force fan hub puller is a dual-purpose tool that allows for easy and quick removal of the fan ...More |
| |
 |
|
 |
| G-Force ProStart (part# GFA7066) |
G-Force SwashPro 450/500 size (Part# GFA7098) |
| USD$ 65.00 |
|
|
|
| USD$ 38.00 |
|
|
|
|
The G-Force ProStart (patent pending) is an anti-shock drill/driver adaptor which is designed to iso...More |
The new G-Force swashplate tool incorporates the flexibility to be adjustable to accommodate the lar...More |
| |
 |
|
 |
| M3 Locknut wrench (part# GFA7082) |
Micro Throttle Servo adaptor (part# GFA7089 |
| USD$ 7.00 |
|
|
|
| USD$ 16.00 |
|
|
|
|
The G-Force M3 locknut wrench is designed with the heli builder in mind. It allows for installing M...More |
Instead of using a 50 gram standard size servo to control your nitro heli throttle, the G-Force micr...More |
| |
 |
|
 |
| Neckstrap Balancer for DX7/X9303/X9503 (Part# GFA7000) |
SwashPro V2 for 450/500 & 50/90 (GFA7100) |
| USD$ 16.00 |
|
|
|
| USD$ 66.00 |
|
|
|
|
-Low profile
-Easy acesss to on/off switch
-Perfect balancing of transmitter
-Styling blends with...More |
The new G-Force swashplate tool incorporates the flexibility to be adjustable to accommodate the lar...More |
| |
|
|
